銷售日本SMC標準氣缸，VFS5000-S-04

    企業QQ：2880626087

    電話；021-69001039

    手機；17321017802（微信）

    郵箱；[email protected]

    聯系人；周彩云

    地址：上海市嘉定區江橋嘉涌路99弄6號713室

    將自動開關安裝到自動開關安裝槽中，大致設置為

    自動開關的安裝位置。

    handle one-touch fittings.

    q Fit an auto switch into the auto

    switch mounting groove to set it roughly to the

    mounting position for an auto switch.

    w After reconfirming the detecting position,

    tighten the auto switch mounting screw  to

    (applicable tubing O.D.  3.2 to  6), refer to

    Best Pneumatics No. 6.

    Refer to the Fittings and Tubing Precautions

    (Best Pneumatics No. 6) for how to

    w重新確認檢測位置后，擰緊汽車開關安裝螺絲*

    保護自動開關。

    e檢測位置的修改應在q的條件下進行。

    secure the auto switch.

    e Modification of the detecting position

    should be made in the condition of q.

    When tightening an auto switch mounting screw,

    use a watchmaker’s screwdriver with a handle of

    approximately 5 to 6 mm in diameter.

    (Use a tightening torque of approximately 0.10 to 0.20 N·m.)

    *擰緊汽車開關安裝螺絲時，請使用帶手柄的制表機螺絲刀

    直徑約5至6mm。

    （使用約0.10 0.20N·m的緊固扭矩）

    For details about one-touch fittings,

    miniature fittings and speed controllers (applicable

    tubing O.D.  2 only), refer to the

    catalog ES50-25 (B edition or later).

    Also, for details about speed controllers

    銷售日本SMC標準氣缸，VFS5000-S-04